-
-
- Casos de estudio
- Noticias y eventos
-
Compañía
Filtralite Air 10–20 es un medio filtrante de alta calidad, fabricado a partir de arcilla expandida, y utilizado para biofiltración y depuración en el tratamiento de gases y desodorización.
Filtralite Air 2–4 es un medio filtrante de alta calidad, fabricado a partir de arcilla expandida, y utilizado para biofiltración y depuración en el tratamiento de gases y desodorización.
Filtralite Air 4–10 es un medio filtrante de alta calidad, fabricado a partir de arcilla expandida, y utilizado para biofiltración y depuración en el tratamiento de gases y desodorización.
Información técnica complementaria sobre nuestros productos y soluciones Filtralite® Air.
Packing materials used in biofiltration play a key role to ensure a cost-effective air pollutant abatement. Leca expanded clay materials reduce operating costs, improve system performance and facilitate biofilters or biotrickling filter maintenance.
Used as packing materials in biotrickling filters, Filtralite Air media support higher H2S and toluene removal efficiencies than conventional plastic rings, and significantly better process start-up, with residence times of 7.5 to 15 seconds.
In order to get a better understanding of the limitations for optimization and further development of biofiltration for odour control, a study of overall mass transfer coefficient of volatile sulfur compounds for packing materials potentially used for biotrickling is presented.
The objective of this study was to investigate the relationship between air velocity and pressure drop, material particle size distribution and wetting conditions for Filtralite AIR (Leca LWA). The study shows that increasing particle size average and reduced particle size range together with wetted condition in general are positive for pressure drop.
This study investigates the impact of particle size, gas velocity and chemical properties of contaminants on the overall volumetric mass transfer coefficient based on direct measurements of odorous organic compounds in granular media.
In this study, the cleaning efficiency and operational stability of four Filtralite Air based biofilters were examined. Filtralite Air based biofilters reduce the concentration of odour, ammonia and hydrogen sulphide by 78, 96 and 26% respectively. [In Danish]
Removal of volatile sulphur compounds from livestock waste air by biological air filtration may be enhanced by use of filter materials with reactive properties (autocatalytic removal). In this study, Filtralite AIR was tested with respect to sorption and potential chemical degradation of H2S, methanethiol and dimethyl sulphide.
In this study, a method based on Proton-Transfer-Reaction Mass Spectrometry has been developed in combination with a developed model to determine the mass transfer coefficient of volatile Sulphur compounds for selected filter materials used in biofilters.
This paper investigates the combined impact of filter medium particle size and shape on the air volume – pressure loss relationship. A new model concept for estimating air volume – pressure loss across different particle size distributions and particle shapes are proposed.
In this study, measurements of pressure gradients inside filter media bed with coarse granular porous media are investigated with respect to an initial pressure loss near inlet and a linear pressure gradient through the filter bed.
Pressure drop will increase over time due to accumulation of biomass and dust. This study investigates the correlation between initial pressure drop and the development of such during accumulation of biomass and dust.
Descubre más sobre las aplicaciones, ventajas clave y aspectos técnicos de Filtralite Air para sistemas de purificación de aire y gas. Diseñado para favorecer el crecimiento de biopelículas y una eficiente eliminación de olores, Filtralite Air ayuda a conseguir aire limpio con un rendimiento duradero.